Apr
20
Riser / Distributor Tube Diameter
April 20, 2007 |
This does not come up that often but it did today so I thought I’d write a quick note about it. When you order a control valve from us at our water softener parts page, they all come configured with a 1.05-inch diameter distributor hole in the bottom (with the exception of the Fleck 7000). If you are replacing a control valve on an older softener, somewhere around 20 years old, then you might have a 13/16-inch diameter distributor. This does not occur very often but when it does, just drop us a line with your Water Value order number and we’ll get an adapter bushing out to you right away.
Comments
You must be logged in to post a comment.